|
|
DC Motor Drives by Bardac Corporation
Non-Reversing Model 300E DC Drive
Model 300E Controller up to 0.5 HP
NEMA 1 (IP44) Enclosed for wall mounting with
Illuminated On/Off Switch
Speed Setting Potentiometer and Dial
Power Fuse
Non-isolated
6.9" H x 4.9" W x 3.4" Deep (175 x 125 x 85 mm)
Non-Reversing Models 400E, 800E, 1200E DC Drives
Model 400E Controller up to 0.75 HP
1-50/60-110/240
90/180 VDC Output
4 Amps Maximum Output
Model 800E Controller up to 1.50 HP
1-50/60-110/240
90/180 VDC Output
8 Amps Maximum Output
Model 1200E Controller up to 2 HP
1-50/60-110/240
90/180 VDC Output
12 Amps Maximum Output
NEMA 1 (IP44) Enclosed for wall mounting with
Power On/Off Switch
Speed Setting Potentiometer and Dial
Power Fuse
Non-isolated
6.9" H x 6.9" W x 4.5" Deep (175 x 175 x 115 mm)
DC Drives with Reversing and Dynamic Braking
Model 400ERB Controller up to 0.75 HP
1-50/60-110/240
90/180 VDC Output
4 Amps Maximum Output
Model 800ERB Controller up to 1.50 HP
1-50/60-110/240
90/180 VDC Output
8 Amps Maximum Output
Model 1200ERB Controller up to 2 HP
1-50/60-110/240
90/180 VDC Output
12 Amps Maximum Output
NEMA 1 (IP44) Enclosed for wall mounting with
Power On/Off Switch
Forward-Reverse Selection
Speed Setting Potentiometer and Dial
Power Fuse
Relay Reversing with a zero speed interlock to ensure smooth operation.
Dynamic Braking operates when the drive is either reversed or stopped.
Non-isolated
10" H x 6.9" W x 4.5" Deep (250 x 175 x 115 mm)
Isolated and Regenerative
Controllers with isolation and regeneration are available for panel mounting.
Please request a quotation.
DC Motors
Totally Enclosed, 1750 RPM, 90 VDC Armature,
Permanent Magnet Field, For 115 VAC Single Phase Drives.
0.25 HP, 1750 RPM, 90 VDC, PM, DC Motor, 56C with Removable Base
0.33 HP, 1750 RPM, 90 VDC, PM, DC Motor, 56C with Removable Base
0.50 HP, 1750 RPM, 90 VDC, PM, DC Motor, 56C with Removable Base
0.75 HP, 1750 RPM, 90 VDC, PM, DC Motor, 56C with Removable Base
1.0 HP, 1750 RPM, 90 VDC, PM, DC Motor, 56C with Removable Base
Totally Enclosed, 1750 RPM, 180 VDC Armature,
Permanent Magnet Field, For 230 VAC Single Phase Drives.
0.25 HP, 1750 RPM, 180 VDC, PM, DC Motor, 56C with Removable Base
0.33 HP, 1750 RPM, 180 VDC, PM, DC Motor, 56C with Removable Base
0.50 HP, 1750 RPM, 180 VDC, PM, DC Motor, 56C with Removable Base
0.75 HP, 1750 RPM, 180 VDC, PM, DC Motor, 56C with Removable Base
1.0 HP, 1750 RPM, 180 VDC, PM, DC Motor, 56C with Removable Base
1.5 HP, 1750 RPM, 180 VDC, PM, DC Motor, 56C with Removable Base
2.0 HP, 1750 RPM, 180 VDC, PM, DC Motor, 182/145TC with Removable Base
3.0 HP, 1750 RPM, 180 VDC, PM, DC Motor, 182/145TC with Removable Base
Return to Power Quality and Drives Home Page
|
