Pump Control, NEMA Size 1, 8 to 32 Amps, 230 or 460 VAC

Product #:	CIE3R-32/P-ACJX
Brand:	Cerus Industrial
Description:	Service Entrance Rated Fusible Disconnect, 60 Amp NEMA 3R Enclosure NEMA Size 1 Starter, 3 Phase, 60 Hz, 230/460 VAC 32 Amp Contactor, 120 VAC Coil Model CRP Solid State Overload Relay, adjustable 8 to 32 Amps. Rain Tight Hub as shown in picture is not included. Control Power Transformer, 230 x 460 VAC Primary, 115 VAC Secondary, will be connected for 460 VAC. Reconnect the primary if the power source and motor are rated 230 VAC. Select a control according to the Disconnect Size and Fuse Size needed as per NEC Article 430.52. 20 HP @ 460 VAC 10 HP @ 230 VAC Run Pilot Light (Red), Off Pilot Light (Green), Hand-Off-Auto, Start Pushbutton, Overload Reset mounted on door. Will accept customer supplied remote contact closure in Auto. Model CRP Overload Relay: Adjustable Trip Amps Solid-state Microprocessor Based Class 1 to 30 infinitely selectable via trip time setting: 0 to 30 Seconds, set time is the trip time at six times the set current. Operational Temperature: -25 to +70 degrees C Protections: Phase current unbalance Phase loss/phase failure Stall Protection Phase current unbalance: trips within 5 seconds when the phase current unbalance exceeds 50%. Phase loss/phase failure: trips within 3 seconds when phase current is 70% unbalanced. Stall Protection: Trips at 170% of full load amps at 3 seconds. LED indication of faults for over current, phase failure. Lightning Arrestor rated at 2000 clamping volts at 60,000 Amps Surge. Over 60,000 Amps to 100,000 Amps will be passed but Arrestor will need replacement. 600 VAC, Time Delay, Current Limiting Fuses, Class J, are required. Fuses are not included. Four weeks to ship. Allow additional time for transit from the shipping point in Oregon. Shipping by ground freight is included in the price.
Price:	$1005.00