Model CRP 22 Overload Relay 1 to 5 Amps

Product #:	CRP22-3S-5
Brand:	Cerus Industrial
Description:	Factory Stock Adjustable Trip Amps Solid-state Microprocessor Based Class 1 to 30 infinitely selectable via trip time setting: 0 to 30 Seconds, set time is the trip time at six times the set current. Class 1: Set at 1 second Class 5: Set at 5 seconds Class 10: Set at 10 seconds Class 20: Set at 20 seconds Class 30: Set at 30 seconds Control Power Required: 100 to 260 VAC, 50/60 Hz, 1 PH Operational Temperature: -25 to +70 degrees C Three Phase Screw or DIN rail mount. Screw Terminals Power input requirement: 100 to 260 VAC, single phase, 50/60 Hz Auxiliary Contacts: 2 SPDT (when power applied) Protections: Over current protection Phase current unbalance Phase loss/phase failure Stall protection Over current protection: operates according to the inverse time characteristic. Phase current unbalance: trips within 5 seconds when the phase current unbalance exceeds 50%. Phase loss/phase failure: trips within 3 seconds when phase current is 70% unbalanced. Stall Protection: Trips at 170% of full load amps at 3 seconds. LED indication of faults for over current, over current trip, phase failure. 53mm W x 68mm H x 87.5mm D When used for Full Load Amps greater than 5, set Trip Amps at 5, use a current transformer with a 5 amp secondary, select a current transformer so that the motor rated FLA is close to mid-range of the primary amps, and use the overload model with screw terminals. Units for single phase and units with current tunnels rather than screw termnals are also available. 18 Month Warranty Shipping by ground UPS is included in the price shown. You may order by telephone: (203) 217-2353 Please have the following information: Credit Card number Expiration date Name on the card Credit Card billing address Shipping address
Price:	$63.00