Use with motor voltages up to 600 VAC.
Control power required for operation: 100 to 260 VAC, 50/60 Hz, 1 PH
Output contacts: 3A, 250 VAC resistive load
Adjustable Trip Amps 16 to 80
Solid-state Microprocessor Based
Class 1 to 30 infinitely selectable via trip time setting: 0 to 30 Seconds, set time is the trip time at six times the set current.
Operational Temperature: -25 to +70 degrees C
Screw or DIN rail mount.
Phase current unbalance
Phase loss/phase failure
Phase current unbalance: trips within 5 seconds when the phase current unbalance exceeds 50%.
Phase loss/phase failure: trips within 3 seconds when phase current is 70% unbalanced.
Stall Protection: Trips at 170% of full load amps at 3 seconds.
LED indication of faults for over current, phase failure.
Units for single phase and units with current tunnels rather than screw termnals are also available.
You may order by telephone: (203) 217-2353
Please have the following information:
Credit Card number
Name on the card Credit Card