| Disconnect switch as shown in the photo is not included.
Manual alternation for one float switch input is standard.
Automatic alternation for one float switch input is available. See the options listed to the right.
3 Pole, 18 Amp, NEMA Size 0 Contactor,
1 and 3 Phase,
120, 208, 240, 277, or 480 VAC motor voltage.
Adjust control transformer primary taps to match incoming power, 120 VAC secondary.
Steel enclosure.
UL listed.
PUMP 1 - PUMP 2 Selector
Single HAND-OFF-AUTO Selector
Run LED Pilot Light in door for each pump
AUTO input accepts remote dry contact.
Non-reversing
Non-combination (no disconnect)
Overload Relay Model CRP-22
Adjustable Trip Amps from 4.4 to 22 Amps, no heaters required.
Solid-state Microprocessor Based
Class 1 to 30 infinitely selectable via trip time setting: adjust from 0 to 30 Seconds, the time you set is the trip time at six times the set current. Example: 10 seconds will give a Class 10 trip.
Operational Temperature: -25 to +70 degrees C
Protections:
Phase current unbalance
Phase loss/phase failure
Stall Protection
Phase current unbalance: trips within 5 seconds when the phase current unbalance exceeds 50%.
Phase loss/phase failure: trips within 3 seconds when phase current is 70% unbalanced.
Stall Protection: Trips at 170% of full load amps at 3 seconds.
LED indication of faults for over current, phase failure.
Specify Motor HP and voltage when ordering.
Three Phase
5 HP @ 200 VAC
5 HP @ 230 VAC
10 HP @ 460 VAC
15 HP @ 575 VAC
Single Phase
1 @ 115 VAC
3 HP @ 230 VAC
Shipping by ground UPS is included.
You may order by telephone: (203) 217-2353
Please have the following information:
Credit Card number
Expiration date
Name on the card
Credit Card billing address
Shipping address
|
