| Manual alternation for one float switch input is standard.
Automatic alternation for one float switch input is available. See the options listed to the right.
3 Pole, 32 Amp, NEMA Size 1 Contactor,
1 and 3 Phase,
120, 208, 240, 277, or 480 VAC motor voltage.
Adjust control transformer primary taps to match incoming power, 120 VAC secondary.
Steel enclosure.
UL listed.
PUMP 1 - PUMP 2 Selector
Single HAND-OFF-AUTO Selector
Run LED Pilot Light in door for each pump
AUTO input accepts remote dry contact.
Non-reversing
Combination with Motor Circuit Protector
30kAIC @ 460 VAC
Overload Relay Model CRP-40
Adjustable Trip Amps from 8 to 40 Amps, no heaters required.
Solid-state Microprocessor Based
Class 1 to 30 infinitely selectable via trip time setting: adjust from 0 to 30 Seconds, the time you set is the trip time at six times the set current. Example: 10 seconds will give a Class 10 trip.
Operational Temperature: -25 to +70 degrees C
Protections:
Phase current unbalance
Phase loss/phase failure
Stall Protection
Phase current unbalance: trips within 5 seconds when the phase current unbalance exceeds 50%.
Phase loss/phase failure: trips within 3 seconds when phase current is 70% unbalanced.
Stall Protection: Trips at 170% of full load amps at 3 seconds.
LED indication of faults for over current, phase failure.
Specify Motor HP and voltage when ordering.
Three Phase
7.5 HP @ 200 VAC
10 HP @ 230 VAC
20 HP @ 460 VAC
25 HP @ 575 VAC
Single Phase
2 HP @ 115 VAC
5 HP @ 230 VAC
Shipping by ground UPS is included.
You may order by telephone: (203) 217-2353
Please have the following information:
Credit Card number
Expiration date
Name on the card
Credit Card billing address
Shipping address
|
