| Shipment in one to two days.
3 Pole, 150 Amp, NEMA Size 4 Contactor,
1 and 3 Phase,
208, 240, 277, or 480 VAC motor voltage.
115 and 575 VAC is available.
Adjust control transformer primary taps to match incoming power,
120 VAC secondary.
Steel enclosure.
UL listed.
Start, Stop Pushbuttons in door
Non-reversing
Non-combination (no disconnect)
UL Type 4 Steel Enclosure
(Indoor or outdoor use to provide a degree of protection against falling rain,
splashing water, and hose-directed water; undamaged by the formation of
ice on the enclosure.)
UL Type 12 Steel Enclosure
(Indoor use to provide a degree of protection against dust, dirt, fiber flyings,
dripping water, and external condensation of noncorrosive liquids.)
Bimettalic Overload Relay
Adjustable Range 100 to 150 Amps (Heaters are not required.)
Class 10
1NO/1NC Trip Contacts
Differential Phase Failure Protection
Ambient Compensated (-5 to 40 Degrees C)
Manual/Automatic Reset
Specify Motor HP and voltage when ordering.
Three Phase
40 HP @ 200 VAC
50 HP @ 230 VAC
100 HP @ 460 VAC
100 HP @ 575 VAC
Options:
Door mounted Reset Pushbutton. Add $ 28.00
Wiring for single phase motor. No Charge.
Terminal control only (No Start, Stop Pushbuttons). No charge.
|
