Shipment in one to two days.
3 Pole, 220 Amp Contactor, No NEMA Size,
1 and 3 Phase,
208, 240, 277, or 480 VAC motor voltage.
115 and 575 VAC is available.
Adjust control transformer primary taps to match incoming power,
120 VAC secondary.
Start, Stop Pushbuttons in door
Non-combination (no disconnect)
UL Type 4 Steel Enclosure
(Indoor or outdoor use to provide a degree of protection against falling rain,
splashing water, and hose-directed water; undamaged by the formation of
ice on the enclosure.)
UL Type 12 Steel Enclosure
(Indoor use to provide a degree of protection against dust, dirt, fiber flyings,
dripping water, and external condensation of noncorrosive liquids.)
Bimettalic Overload Relay
Adjustable Range 160 to 240 Amps (Heaters are not required.)
1NO/1NC Trip Contacts
Differential Phase Failure Protection
Ambient Compensated (-5 to 40 Degrees C)
Specify Motor HP and voltage when ordering.
60 HP @ 200 VAC
75 HP @ 230 VAC
150 HP @ 460 VAC
150 HP @ 575 VAC
Door mounted Reset Pushbutton. Add $ 28.00
Wiring for single phase motor. No Charge.
Terminal control only (No Start, Stop Pushbuttons). No charge.