Shipment in one to two days.
3 Pole, 85 Amp, NEMA Size 3 Contactor,
1 and 3 Phase,
208, 240, 277, or 480 VAC motor voltage.
115 and 575 VAC is available.
Adjust control transformer primary taps to match incoming power,
120 VAC secondary.
Start, Stop Pushbuttons in door
Non-combination (no disconnect)
UL Type 4 Steel Enclosure
(Indoor or outdoor use to provide a degree of protection against falling rain,
splashing water, and hose-directed water; undamaged by the formation of
ice on the enclosure.)
UL Type 12 Steel Enclosure
(Indoor use to provide a degree of protection against dust, dirt, fiber flyings,
dripping water, and external condensation of noncorrosive liquids.)
Adjustable Trip Amps from 16 to 80 Amps, no heaters required.
Solid-state Microprocessor Based
Class 1 to 30 infinitely selectable via trip time setting: adjust from 0 to 30 Seconds,
the time you set is the trip time at six times the set current.
Example: 10 seconds will give a Class 10 trip.
Operational Temperature: -20 to +60 degrees C
Phase current unbalance
Phase loss/phase failure
Phase current unbalance: trips within 5 seconds when the phase current unbalance exceeds 50%.
Phase loss/phase failure: trips within 3 seconds when phase current is 70% unbalanced.
Stall Protection: Trips at 170% of full load amps at 3 seconds.
LED indication of faults for over current, phase failure.
Specify Motor HP and voltage when ordering.
25 HP @ 200 VAC
25 HP @ 230 VAC
60 HP @ 460 VAC
60 HP @ 575 VAC
5 HP @ 115 VAC
15 HP @ 230 VAC
Door mounted Reset Pushbutton. Add $ 28.00
Wiring for single phase motor. No Charge.
Terminal control only (No Start, Stop Pushbuttons). No charge.